The world’s most powerful medium-speed engine
The Wärtsilä 64 offers an outstanding range of power options for main propulsion machinery. It is based on the latest achievements in combustion technology and features low operating costs and a compact design that reduces space requirements. The excellent reliability ensures long, maintenance-free operation.
The standard engine is equipped with all the essential ancillaries, and has a thoroughly planned interface to external systems.
The Wärtsilä 64 engine is fully compliant with the IMO Tier II exhaust emissions regulations set out in Annex VI of the MARPOL 73/78 convention.
|Wärtsilä 64||IMO Tier II|
|Cylinder bore||640 mm||Fuel specification:|
|Piston stroke||900 mm||Fuel oil||700 cSt/50oC|
|Cylinder output||2150 kW/cyl||7200 sR1/100 F|
|Speed||327.3, 333.3 rpm||ISO 8217, category ISO-F-RMK 700|
|Mean effective pressure||25.5, 25.0 bar||SFOC 164 g/kWh at ISO condition|
|Piston speed||9.8, 10.0 m/s|
|Dimensions (mm) and weights (tonnes)|
|6L64||10 250||10 540||4 395||4 065||5 345||1 905||233|
|7L64||11 300||11 690||4 510||4 165||5 345||1 905||265|
|8L64||12 350||12 740||4 510||4 165||5 345||1 905||295|
A* - Total length of the engine when the turbocharger is located at the flywheel end.
A - Total length of the engine when the turbocharger is located at the free end.
B - Height from the crankshaft centreline to the highest point.
B* - Height from the crankshaft centreline to the highest point when the turbocharger is located at the flywheel end.
C - Total width of the engine.
C* - Total width of the engine when the turbocharger is located at the flywheel end.
D - Minimum height from the crankshaft centreline when removing a piston.
F - Distance from the crankshaft centreline to the bottom of the oil sump.
Dimensions and weights
- Dimensions are in millimetres and weights are in metric tonnes. Indicated values are for guidance only and are not binding.
- Cylinder configurations: L = in-line and V = v-form.
Specific fuel oil consumption
At ISO standard reference conditions
Lower calorific value of fuel 42 700 kJ/kg
Without engine driven pumps
At 85% load
ISO standard reference conditions
Total barometric pressure: 1.0 bar
Suction air temperature: 25 °C
Charge air, or scavenge air, cooling water temperature: 25 °C
Relative humidity: 30%
Wärtsilä engines are delivered with the UNIC embedded engine management system.
The UNIC system is designed to ensure extended lifetime for large marine diesel and gas engines operating in the toughest of conditions. Special attention has been paid to temperature- and vibration endurance throughout the design, while the highest priority has been given to operational reliability.
Key features of the UNIC system include the engine safety system, local monitoring, speed control with loadsharing, fuel injection- and timing control, knock detection, alarm signal acquisition, start/stop sequencing, load reduction request, system diagnostics, and a fieldbus interface as applicable for each engine configuration.
Thanks to the electronic control, the engine can be adapted to different operating conditions. Furthermore, the pre-tested configuration allows the engine or generating set to be made ready for operation with a minimum of commissioning and installation work.
Conditions for use
The 2D and 3D models and drawings downloaded (”Marine Solutions Drawings”) are for general guidance purposes only and should not be used for actual projects. Models and drawings for specific projects must be obtained from the appropriate Wärtsilä personnel as there may be deviations from the Downloadable Files.
File formats supported include DXF and PDF for 2D models and IGES, STEP, DXF, SAT and WRML for 3D models. A 2D DXF or PDF should always be used to support the 3D models. The Downloadable Files are subject to changes or improvements by Wärtsilä without notification so please check regularly for new and updated files at www.wartsila.com.
Wärtsilä takes no responsibility for and disclaims any liability for the contents of the Downloadable Files, including but not limited to omissions, errors, deficiencies, inaccuracies contained therein, and the use or misuse thereof. In no event, shall Wärtsilä be liable for any consequential, special, contingent, or incidental damages or injury, financial or otherwise, suffered by any party arising out of, connected with, or resulting from the use of the Downloadable Files or the information contained therein.
This website contains information, which is owned by or licensed to Wärtsilä. Wärtsilä shall retain all rights, including copyrights, relating to the information in the Downloadable Files. Reproduction or transmission to third parties is prohibited without prior written approval of Wärtsilä. Copyright© 2012 Wärtsilä.
The agreement made with Containerships Ltd Oy covers the retrofitting of a Wärtsilä fresh water scrubber system in 2011 for the company’s Containership VII vessel, which is equipped with a Wärtsilä 7L64 main engine. »
- Towards optimum efficiency and ultra low emissions PDF, 222Kb »
- Making the most of perfect maintenance timing PDF, 169Kb »
- Adaptive control - a means for ensuring engine control quality PDF, 200Kb »
- Engine safety enhanced with wireless temperature monitoring PDF, 215Kb »
- Wärtsilä R&D is responding to increasing concern about particulate emissions PDF, 102Kb »
- Compact Silencer System - for reduced noise PDF, 137Kb »
- Infographics - Wärtsilä Common Rail PDF, 674Kb »
- Nothing common about common rail PDF, 177Kb »
- The labours of Hercules PDF, 688Kb »